Air pressure syringe type DCOP-S series

Basic functions are incorporated in a compact body for syringe dispensing. This general purpose single-component dispenser is truly cost effective.

• Operates at 100 to 240 VAC, requiring no modification for use outside Japan.
• The minimum time range setting is 0.001 sec., enabling dispensing of very small volumes and fine control of dispensing time.
• Input/output terminals are provided for joint operation with automated machinery such as robots.
• Compact and lightweight, this dispenser is portable and requires only a small installation space.

Syringe valve type DCOP-S4

Parts that come in contact with liquids (syringe, needle, nozzle, etc.) are all made of plastic. The dispenser is free from the liquid degradation or parts corrosion that can occur in reactions with metal contents.

• Since the needle closes the liquid outlet at the syringe tip when a discharge is complete, the liquid stops neatly without dripping from the nozzle.
• Liquid is replenished through the liquid port without the need to remove the syringe.
• Input/output terminals are provided and the output head incorporates a small and lightweight (180 g) syringe valve for joint operation with automated machinery such as robots.

Air pressure liquid-discharging valve type DCOP-D

DCOP-D is a dispenser incorporating a dosing valve that opens and closes by air pressure. Liquid dripping can be prevented for accurate operation. A wide range of tanks and dosing valves are available to meet users' specific needs.

• Operates at 100 to 240 VAC, requiring no modification for use outside Japan.
• The minimum time range setting is 0.001 sec., enabling dispensing of very small volumes and fine control of dispensing time.
• Input/output terminals are provided for joint operation with automated machinery such as robots.

Volumetric metering type DCOP-M2

The volumetric metering system ensures metering with high accuracy even in small volumes and with changes in liquid viscosity caused by temperature changes. Two basic types are available to choose from for a wide range of applications involving highly accurate discharging of very small fixed volumes.

• Operates at 100-240 VAC, requiring no internal transformer or modification for use outside Japan.
• The minimum time range setting is 0.001 sec., enabling dispensing of very small volumes and fine control of dispensing time.
• Suitable for discharging of a fixed volume of liquid in a wide viscosity range.
• Operation is not affected by changes in liquid viscosity caused by temperature changes.
• Input/output terminals are provided for joint operation with automated machinery such as robots.

Posi-load metering pumps (50/100)

The mechanism of this dispenser is simple with a metering section below the tank. Liquid is sent directly to the metering pump, enabling accurate metering and discharging without any pressure required.

• Our unique posi-load metering pump is used. A wide output range is available by selecting from different pump sizes.
• Output volume can be changed easily with a stroke adjustment knob. A discharge pressure reducing valve enables easy adjustment of the discharge rate.
• All necessary switches used during work are mounted on the control panel, so that the operator can perform proper operation without difficulty.